Product Data Sheet	330mi6w
HBL330MI6W
This device provides on/off switched control of a plug connected load and includes an interlocking feature to prevent the plug from being disconnected while the receptacle is energized. The switch cannot be turned "ON" until the plug is inserted properly, and the plug cannot be removed until the switch is turned "OFF." Hubbell Wiring Device-Kellems Product Specifications  Product Type  Watertight IEC 309  Material  Non Metallic  Service  Standard  Fused Switch?  No  Type of Device  Mechanical Interlock IEC 309  Amperage  30A North American  Voltage  250  Poles and Wires  2 Pole, 3 Wire Grounding  Color    Configuration  UL 1686 C2, IEC 309-2, Clock Position 6, Watertight.  Enclosure Type  Outdoor-4X (Watertight, Washdown) Indoor-12 (Dusttight, Falling Dirt and Noncorrosive Liquids) - IP67.  Horsepower  3 (208-240V AC)  Suggested Plug  HBL330P6W  Dimension A  7.75" (196.9)  Housing Material  Valox  Mounting Inserts Material  Brass.  Mounting Screw Material  Stainless Steel (300 Series).  Contact Carrier Material  High-Impact Thermoset.  Retainer Material  High-Impact Thermoset.  Phase, Ground Sleeves Material  Brass.  Terminal Screw Material  Stainless Steel (300 Series).  Assembly Screw Material  Stainless Steel (300 Series).  Gaskets Material  Solid Neoprene.  Arm Spring Material  Stainless Steel 300 Series  Cover Material  Valox  Sleeve Spring Material  20A and 30A Stainless Steel (300 Series); others are Beryllium Copper multi-contact inserts w/silver plating.  Sealing Gasket Material  Neoprene.  Base Material  Valox®.  Handle Material  Valox.  Enclosure Material  Nonmetallic, enclosure suitable for metallic conduit.  Enclosure Gasket Material  Neoprene.  Shaft Seal Material  Neoprene.  Enclosure Screws Material  Stainless Steel 300 Series.  Hinge Pins Material  Nickel Plated Brass.  Top Material  Valox.  Conduit Hub Material  Zinc Watertight.  Shaft Material  Valox.  Ground Plate Material  Galvanized Steel.  Enclosure Inserts Material  Brass.  Dielectric Withstand Voltage  3000V Min.  Current Interrupting  Certified for current interrupting at full rated current and voltage.  Short Circuit Withstand Rating  Suitable for use on a circuit capable of delivering not more than 10,000 RMS symmetrical amperes at the voltage rating of the receptacle.  Operations  Mechanical 10,000 Cycles, Electrical 6,000 Cycles  Temperature Rise  Max. 30°C temperature rise at full rated current after 50 cycles of overload at 150% of rated current at a power factor of .75.  Endurance  10,000 Mechanical- 6,000 Connect and Disconnect cycles at full rated current and voltage  Impact Resistance  In accordance with UL 746C.  Terminal Identification  In accordance with UL, CSA and international conventions.  Product Identification  Identification and ratings are part of the external label and molded into the receptacle mount.  Mounting  External adjustable feet.  Moisture Resistance  Outdoor - 4X (Watertight, Washdown) Indoor - 12 (Dusttight, Falling Dirt and Noncorrosive Liquids) IP67.  Flammability  UL94-5VA and VO Classification.  Operating Temperatures  Maximum Continuous 75° C Minimum - 40°C w/o impact.  UV Resistance  All materials are UV stabilized Certifications UL Listed, CSA Certified. Watertight Application Guide Industry Watertight Agriculture Outdoor for fans, heaters, pumps, etc. Chemical Processing Where subject to water, corrosion and rough use. Construction Outdoors subject to severe weather conditions. Entertainment Outdoors subject to severe weather. Food Processing Where subject to water, corrosion and rough use. Food Service Areas subject to wash downs & heavy cleaning. Light Manufacturing Subjected to cleaning, solvents & chemicals. Manufacturing Where subject to water, corrosion and rough use (i.e., mills). Military Outdoor construction or maintenance subject to severe weather.